X Band Up/Downconverter
Description
This X Band Up/Downconverter is specifically designed to operate in X Band. X Band Up/Downconverter is controlled using digital lines. When Digital lines are used faster switching speed and more reliable control can be achieved.
Features
- The "X Band Up/Downconverter" is designed for round-the-clock continuous operation mode (at least 20 hours and 4 hours break) in normal climatic conditions.
- Supply of the "X Band Up/Downconverter" is carried out from the source of the single-phase alternating current with a voltage of 220V and a frequency of 50Hz.
- The "X Band Up/Downconverter" consists of one unit. The unit on the front panel has four RF inputs and three RF outputs, 1 input for the unit control, indicators and a network switch. The back panel of the unit has a connector for the power supply, programming port and a grounding bolt.
- "X Band Up/Downconverter" meets the safety requirements of Russian State Standard for electrical, mechanical, and fire safety - GOST R IEC 60950.
Technical Specifications
| Description | Specification |
| Downconverter Specifications | |
| Input Frequency | X - Band (8 - 12 GHz) |
| Output Frequency | Fixed at 1GHz or Variable in 1 - 5GHz |
| Bandwidth | 200 MHz |
| Input Dynamic Range | 50dB |
| Input Power | -50 dBm to +30 dBm |
| Amplitude Flatness | ± 0.5 dB |
| Spurious in 200MHz BW | Better than 50dBc |
| Residual LO Power | < -55 dBm |
| VSWR | Better than 1.5:1 |
| Noise Figure | 10 dB |
| Impedance | 50 Ohm |
| Attenuator | For Ref Level Adjustments with VST |
| Connectivity | RF IN & OUT: SMA (female) |
| Upconverter Specifications | |
| Input Frequency | Fixed at 1GHz or Variable in 1 - 5GHz |
| Output Frequency | 8 - 12 GHz |
| Bandwidth | 200 MHz |
| Output Power Control Range | 100 dB |
| Input Power | -50 dBm to 0 dBm |
| Amplitude Flatness | ± 0.5 dB |
| Spurious in 200MHz BW | Better than 50dBc |
| Residual LO Power | < -60 dBm |
| VSWR | Better than 1.5:1 |
| Noise Figure | 15 dB |
| Impedance | 50 Ohm |
| Attenuation Range | 100 dB |
| Connectivity | RF IN & OUT: SMA (female) |
| Common Specifications | |
| Gain/Attenuator | To compensate conversion loss/gain |
| LO | Common for X Band Up/Downconverters |
| Digital Interface | VHDCI Connector of VST to X Band Up/Downconverters |
| Power Supply | Please provide your requirement |
| Operating Temperature | 00 - 550 C |
| Size | (482.6 X 369.7 X 88.1) mm |
| Weight | 4 kg |
